A new pump station is a serious investment. By the time your new equipment rolls up on the back of a truck, you’ll have spent thousands of dollars (and hours of your time) designing your system and finding a knowledgeable manufacturer with the skills required to build it properly.
You’ll also have spent anywhere between $40,000 and $400,000 on the pump station itself – and any ancillary equipment needed to improve the overall efficiency of your irrigation setup.
Given the substantial nature of this investment, it makes sense to ensure that you’re entrusting the final stages of the process to a seasoned and professional organization with the specialized knowledge required to install a best-in-class irrigation pump station.
It’s also worth remembering that most pump stations are precision-built to an exacting specification. Generally speaking, they’re optimized to work in a specific environment and require careful calibration to operate efficiently.
Even something as simple as incorrectly setting the intake lines, which need to be kept at a precise angle to prevent air entrapment, can and will have a significant impact on the overall efficiency and reliability of your new system, which is why we always recommend working with subject-matter experts with proven experience in the field.
Here at Hoover, we’ve been carrying out our own turnkey irrigation pump station installations for over four decades now: Building up the in-house expertise and dedicated equipment needed to carry out this precision craft in a reliable and repeatable fashion that delivers consistent results.
"At Hoover, we’re all about solving irrigation problems. It’s our mission to build enduring partnerships with our customers and irrigation solutions that last a lifetime."
Brent Hoover, Founder
Hoover Pumping
Over the past 40+ years, we’ve installed thousands of pump stations on master-planned communities, 18-hole golf courses, sports fields, parks and luxury developments across the state of Florida.
Every single Hoover pump station that you see out in the wild was installed by our in-house team and choosing to work with us means that you’ll be drawing on decades of hands-on experience.
We’re also one of the few Florida-based pump station manufacturers who offer dedicated after sales support to our installation customers.
Rather than simply selling you a new pump station and moving on to the next job, our dedicated installation team are going to install it and set it up correctly. And our turnkey pump station install service doesn't end with the installation; in addition we offer continuous after-sales support and maintenance services.
We'll ensure your investment continues to deliver all the benefits of a fully-functioning and efficient irrigation system.
You may have noticed that this page is light on specific information about our approach and technologies. This is deliberate. We’ve spent 40 years refining our practice and don’t want to share hard-won knowledge with the world at large.
If you’re serious about finding the right solution and need additional information, it would be our pleasure to arrange a time to get deeper into the details. Please reach out using the link below and we will schedule a time to talk through your project and our technologies in more detail.
It's about being the best at your craft and Hoover are the best at their craft. They have pride in what they do.
Eddy Viera
GL Homes
For some pump station manufacturers, the installation process is an afterthought. Their main focus is on closing new deals and they’re more than happy to hand the entire installation process over to 3rd party contractors with a rudimentary understanding of irrigation system and pump station design.
We recognize that leaving the installation to less experienced contractors is a false economy: pump station installation is a precision craft that can have an enormous impact on the overall performance of your pump station. Getting it wrong is (all-but) guaranteed to handicap your new irrigation system and sour the relationships that we depend on to grow our business.
That’s why we’ve invested in creating one of the best-trained and well-equipped pump station installation teams in the industry. Our dedicated installation team is lead by people who've been part of the Hoover team for over 20 years, they bring both expertise and experience to this most critcal aspect of setting up a new irrigation pump station.
With ready access to our own cranes and backhoes, prefabricated concrete pads and all the specialist engineering equipment needed to install a Hoover pump station, we always arrive fully prepared for the job. This includes, for example, generators, so that even in remote locations or building sites with no connection to essential utilities, we have everything needed for a successful installation. When you work with us, you’re guaranteed to see Hoover boots on the ground every day.
We take this approach because years of hard-earned experience have taught us that installation projects run a lot smoother when we maintain full control of the process. We can guarantee a proper installation and ensure that your new system runs smoothly without chasing contractors or waiting for outside help that doesn’t share our commitment to unparalleled service.
It doesn’t matter whether you’re retro-fitting a new pump station on an 18 hole golf course or expanding the infrastructure for a 2,000 home residential development: We believe every pump station installation project should be “plug and play”.
Simply put, you’ve paid a lot of money for your pump station and you deserve to be able to hand the process off to someone who’s experienced enough to ensure that everything’s up and running in a matter of days.
With 9000+ stations installed (and counting) we are a fully stocked and supplied outfit. We have the Hoover tools, products and people needed to get the job done and we have the experience needed to prevent unnecessary delays.
We’ll also be there to make sure that your new system has been flushed and primed properly, and that Hoover Flowguard – our patented remote monitoring and irrigation management software – has been set up correctly.
By the time we leave, you'll have a fully functioning pump station that's been installed properly. And when you’re ready to turn it on, we’ll be on hand to ensure everything goes without a hitch.
We’re confident that our solutions are always robust, reliable and hard-wearing enough to perform for decades to come. We’re also confident that every Hoover installation is carried out to the highest possible standards which is why we offer all of our customers a single, comprehensive Hoover warranty that covers everything from the pump station itself, through to your new intake lines and discharge filters.
This warranty will help you protect a major investment, and it also speaks volumes about the confidence we have in our installation team.
Hoover thinks ahead and helps us find solutions to problems that inevitably crop up when you’re managing a large acreage. They fly by our wingtips.
Mike Smith, Operations Manager
WVID
A master-planned community of 11,000 acres. Some 60,000 residents will eventually call Wellen Park home, supported with all the infrastructure expected of a 21st century city.
We're proud to be supporting Wellen Park with a completely scaleable and smart, water delivery and management solution, with every pump station managed intelligently. It's a solution that will both endure, and ensure the highest standards of water and energy efficiency for years to come.
We start every pump station installation by familiarizing ourselves with your site: reviewing satellite imagery, aerial photographs, drone footage or pre-existing maps to make sure that we’ve picked out the best location for your pump station and intake lines.
Careful planning allows us to anticipate potential challenges too. All too often, installation contractors that fail to plan for the job at hand find themselves fighting to correct preventable problems that cause poor flow, reduce efficiency and do not deliver reliability.
Overcoming these challenges wastes your time and money, which is why we always ensure that our teams will arrive on site with the detailed knowledge they need to carry out an efficient and effective installation.
When our team arrives at your site to carry out the installation, they’ll know exactly what they’re doing – and they’ll be prepared to mitigate any potential problems that could crop up along the way.
As mentioned above, we also have the cranes, backhoes, generators, prefabricated concrete pads and specialist engineering equipment needed to complete your installation in good time. Not to mention the specialized knowledge needed to ensure that your new pump station is set up correctly and running at peak efficiency.
Having familiarized ourselves with your irrigation water source and checked the quality of the water you’ll be drawing from, we'll also take care of the fine detail, for example, working out where and how the intakes should be positioned so you never have to worry about fluctuating lake water levels.
Our installations are a comprehensive and exacting process that’s been fine-tuned over forty years of hands-on experience, and we’re confident that it can’t be beaten by any other pump station manufacturer.
Contact us using the form below and a member of our team will be in touch to talk through your options. Alternatively, you can read more about our irrigation pump station design process here.
Tell Us All About It!
Leadership in Energy Conservation Award
Manufacturer of the Year
LEED AP Experts on Staff
Certified Technicians
2801 N Powerline Road Pompano Beach, FL 33069